The best way to Reset Diagnostics Codes inside a Chevy Tahoe 1Locate the diagnostics port near the fuse panel on the underside of the driver-side dashboard. This port must be the exact same shape and size as the connector on the OBD scan tool.
Plug the OBD scan tool into this port, taking care not to push too tough because this could bend the pins inside the plug.2Put the essential into the ignition and turn it for the "on" position, but do not begin the engine. This will power on the scan tool.3Wait when the scanner reads the codes.
Search for a command on the scanner that says "delete" or some similar command and choose it. This can erase the codes and reset the computer system Professional diagnositic tools.4Unplug the scan tool and start the engine Obd2 scanner. Verify on the instrument panel that all warning and service lights have shut off.
Related articles:
没有评论:
发表评论