car diagnostic software press Energy

The best way to Troubleshoot an HP OfficeJet 5610 1Check if you can find error messages being displayed in your personal computer. If " auto diagnostic;Paper Mismatch" or one thing equivalent is displayed, you likely are attempting to print a non-A4 document car diagnostic software, or perhaps a size apart from the default. Adjust the print settings and try once again.

If "Printer is offline" is displayed, but the printer is properly connected, use the HP Automobile Diagnostics tool (see Resources) to repair the error.2Check if you'll find error messages on the printer itself. A "Paper jam" is definitely the most typical issue, and you will probably be in a position to pull the paper out (firmly but meticulously) to appropriate the problem.

If any kind of "0x" error message appears, disconnect the USB cable, get rid of the print cartridges, disconnect the power cord for 60 seconds, then reconnect it, press Energy, reinsert the cartridges, execute print calibration, connect the USB cable and attempt printing once again.3Check when the error occurs. If a "Scanner failure" message appears when scanning, lift the scanner up and press any button. The scanner bulb really should light up. If it it doesn't, you could have a defective scanner.